亚洲欧美日韩在线精品一区二区-亚洲欧美日韩在线观看二区-亚洲欧美日韩在线不卡-亚洲欧美日韩在线播放-亚洲欧美日韩在线2020-亚洲欧美日韩一区高清中文字幕

Welcome to Shenzhen Zhongyuan Plastic Co., Ltd!

News



Tel:(0755)27151698
Fax:(0755)27150611
Mailbox:szzyzcl@163.com / szzy@szzy99.com
Add:Building A1 and A2, No.1 Industrial Zone, yuliu property company, Gongming town, Bao'an District, Shenzhen
Industry information

當前位置:

首頁 News Industry information

Reasons for cracking of plastic shell

Release time:2022-03-24

The cracking of plastic injection products includes filiform cracks, microcracks, white tops and cracks on the surface of plastic shell, as well as the trauma crisis caused by part sticking and runner sticking. According to the cracking time, it can be divided into demoulding cracking and application cracking. It is mainly caused by the following reasons:


1. Processing

(1) Too much processing pressure, too fast speed, more filling materials, and too long injection pressure holding time will cause excessive internal stress and cracking.

(2) Adjust the mold opening speed and pressure to prevent demoulding cracking caused by rapid and strong tensile parts.

(3) Properly increase the mold temperature to make the parts easy to demould, and appropriately reduce the material temperature to prevent decomposition.

(4) Prevent cracking due to weld lines and plastic degradation, thereby reducing mechanical strength.

(5) Use release agent properly, and pay attention to often eliminate aerosols and other substances attached to the surface of the mold.

(6) The residual stress of the plastic shell can be eliminated by annealing heat treatment immediately after forming, so as to reduce the occurrence of cracks.

圖片4-2.png


2. Mold aspect

(1) The ejection should be balanced, such as the number and cross-sectional area of ejector pins should be sufficient, the demoulding slope should be sufficient, and the surface of the cavity should be smooth enough to prevent the residual stress concentration of ejection from cracking under external forces.

(2) The plastic shell structure should not be too thin, and the transition part should adopt arc transition as far as possible to avoid stress concentration caused by sharp corners and chamfers.

(3) Try to use less metal inserts to prevent the internal stress from increasing due to the different shrinkage of the plastic shell of the inserts.

(4) The deep bottom plastic shell should be equipped with appropriate demoulding air inlet channels to prevent the formation of vacuum negative pressure.

(5) The sprue is large enough to demould the gate before solidification, which is easy to demould.

(6) The connection between the sprue bushing and the nozzle should prevent the plastic shell from sticking to the fixed mold due to the dragging of cold and hard materials.


3. Material aspect

(1) The content of recycled materials is too high, which leads to the low strength of the plastic shell.

(2) The humidity is too high, which makes some plastics react with water vapor, reduces the strength, and causes the plastic shell to eject and crack.

(3) The material itself is not suitable for the processing environment or the quality is poor, and the plastic shell is polluted, causing cracking.


4. Machine

The plasticizing capacity of the injection molding machine should be appropriate. If the plasticizing capacity is too small and insufficient, it will become brittle without sufficient mixing, and if it is too large, it will degrade.


5. Technical aspects

Improper process selection, such as too high material temperature, too high back pressure, too fast glue melting, etc., leads to the decline of physical properties.

Copyright: Shenzhen Zhongyuan Plastic Co., Ltd. | mold processing customized manufacturer. If you want to know the processing price of the factory, how much is it, and which is good, please contact us Yue ICP Bei No. 17060480
主站蜘蛛池模板: 国产在线无遮挡免费观看| 亚洲v国产v欧美v久久久久久 | 精品一区二区三区波多野结衣| 日本a级视频在线播放| 男女一区二区三区免费| 日本一区二区三区免费高清| 久久久久综合中文字幕| 四虎影视永久在线观看| 色中文网| 青青草视频免费观看| 久久国产欧美日韩精品图片| 曰欧一片内射vα在线影院| 黑人大战欲求不满人妻| 中日韩高清无专码区2021| 亚洲色欲色欲www在线播放| 在线色网站| 波多野结衣中文字幕一区二区三区| 夜夜操天天干| 国产成人精品无码一区二区三区| 欧洲一级鲁丝片免费| 国产精品无码无卡无需播放器| 无码超乳爆乳中文字幕久久| 亚洲精品久久婷婷丁香51| 欧美成人精品手机在线| 午夜欧美日韩| 熟女俱乐部五十路二区av| 无遮无挡爽爽免费视频| 国产婷婷精品av在线| 免费国产黄网站在线观看视频| 欧美成人免费午夜全| 少妇邻居内射在线| 人妻少妇中文字幕久久| 亚洲 欧美 自拍 另类 欧美| 97久久婷婷五月综合色d啪蜜芽 | 免费的毛片| 国产乱码一区二区三区| 中文字幕无码一区二区免费| 黄色特级录像| 久久国产精品无码一区二区三区| 久久中文字幕无码一区二区| 农村老熟妇乱子伦视频|